  Identification_Information
    Citation
      Citation_Information
        Originator: Alberta Energy Regulator
        Originator: Alberta Geological Survey
        Originator: Hauck, T.E.
        Originator: Herbers, D.S.
        Publication_Date: 2026
        Title: Lithostratigraphic Picks and Supplemental Data for the Cambrian in Alberta (digital data, various formats)
        Geospatial_Data_Presentation_Form: tabular digital data
        Series_Information
          Series_Name: Digital Data
          Issue_Identification: DIG 2026-0012
        Publication_Information
          Publication_Place: Edmonton, Alberta, Canada
          Publisher: Alberta Geological Survey
        Public_URL: https://ags.aer.ca/publications/all-publications/dig-2026-0012
    Description
      Abstract: This digital dataset contains lithostratigraphic picks for Cambrian formations and units correlated across the province of Alberta. The correlations are described in the associated Open File Report 2026-06: Cambrian Lithostratigraphy and Regional Correlations in the Alberta Basin.

In addition to the pick dataset, the follwoing supplemental data are included: 1) well lists comprising unique well identifiers (UWI) for Basal Cambrian Sandstone and Precambrian monadnock penetrations, respectively, 2) a well list of UWIs for core described, 3) WellCAD files (WellCAD provides a digital format for describing cores) of all logged cores, predominantly from the Basal Cambrian Sandstone, 4) high-resolution images exported from WellCAD of all logged cores in JPEG format, and 5) high-resolution images of the cross-sections contained in the associated open file report in JPEG format.
      Purpose: To provide a comprehensive suite of stratigraphic picks for the Cambrian succession in Alberta and other data supplemental to AGS Open File Report 2026-06, including well lists, lithologs of logged core intervals, and correlated stratigraphic cross-sections.
      Supplemental_Information: English
    Time_Period_of_Content
      Time Period Information
        Single Date/Time
          Calendar_Date: 20260601
    Currentness_Reference: ground condition
  Status
    Progress: Complete
    Maintenance_and_Update_Frequency: None planned
  Spatial Domain
    Bounding Coordinates
      West_Bounding_Coordinate: -120
      East_Bounding_Coordinate: -110
      North_Bounding_Coordinate: 60
      South_Bounding_Coordinate: 49
  Keywords
    Theme
      Theme_Keyword_Thesaurus: ISO 19115 Topic Category
      Theme_Keyword: cambrian
      Theme_Keyword: core
      Theme_Keyword: correlation
      Theme_Keyword: cross sections
      Theme_Keyword: geology
      Theme_Keyword: lithostratigraphy
      Theme_Keyword: tabular data
      Theme_Keyword: wells
    Place
      Place_Keyword_Thesaurus: ISO 19115 Topic Category
      Place_Keyword: alberta
      Place_Keyword: canada
  Access_Constraints: Public
  Use_Constraints: Acknowledgement of the Alberta Energy Regulator / Alberta Geological Survey as the originator/source of this information is required as described in the Open Government License - Alberta.
  Point_of_Contact
    Contact_Information
      Contact_Organization_Primary
        Contact_Organization: Alberta Geological Survey
        Contact_Person: AGS Information Manager
      Contact_Position: AGS Information Manager
      Contact_Address
        Address_Type: mailing and physical
        Address: Alberta Energy Regulator
        Address: 2nd Floor, Twin Atria Building
        Address: 4999-98 Avenue NW
        City: Edmonton
        State_or_Province: Alberta
        Postal_Code: T6B 2X3
        Country: Canada
      Contact_Voice_Telephone: (780) 638-4491
      Contact_Facsimile_Telephone: (780) 422-1459
      Contact_Electronic_Mail_Address: AGS-Info@aer.ca
      Hours_of_Service: 8:00 a.m. to 12:00 p.m. and 1:00 p.m. to 4:30 p.m.
  Cross_Reference
    Citation_Information
      Originator: Alberta Energy Regulator
      Originator: Alberta Geological Survey
      Originator: Hauck, T.E.
      Originator: Herbers, D.S.
      Publication_Date: 2026
      Title: Cambrian Lithostratigraphic Correlations in Alberta
      Geospatial_Data_Presentation_Form: document
      Series_Information
        Series_Name: Open File Report
        Issue_Identification: OFR 2026-06
      Publication_Information
        Publication_Place: Edmonton, Alberta, Canada
        Publisher: Alberta Geological Survey
      Other_Citation_Details: ISBN: 978-1-4601-6608-6
      Public_URL: https://ags.aer.ca/publications/all-publications/ofr-2026-06
Data_Quality_Information
  Attribute_Accuracy
    Attribute_Accuracy_Report: A stratigraphic pick in a well is a point defined in three dimensions (X, Y and Z).

The accuracy of the pick depth, either in measured depth from the kelly bushing or with respect to sea level, is difficult to quantify and includes (but is not necessarily limited to) errors in

- well surface or bottom-hole latitude and longitude (X and Y);

- well ground elevation (Z);

- well kelly bushing elevation (Z);

- human error resulting from errors in picking the incorrect stratigraphic top (Z);

- data entry or data transfer (X, Y, and/or Z); and

- incorrect well log depth calibration (Z).
  Logical_Consistency_Report: The data are tabular (point data with X, Y, and Z values). For the Z value in metres, measured depth (MD), total vertical depth (TVD), and elevation above sea level (El_Masl28) are provided.

The authors made all of the stratigraphic picks. All picks are the same quality.

As the dataset includes vertical and deviated wells, the location data and well identifier data (UWI) are not unique. In non-vertical wells, surface and bottom-hole latitude and longitude should be different. Picks from non-vertical wells are derived from the deviation survey within the geological software Kingdom. The deviation survey uses the measurements of depth, inclination, and azimuth, and a minimum curvature method to interpolate the position of the stratigraphic pick along the non-vertical well path. The position of the stratigraphic pick on a non-vertical well path is therefore dependent on the number of measurements of inclination and azimuth at depth during the time of drilling. In this dataset, the X, Y location for a stratigraphic pick in a non-vertical well is the X, Y location of that well's surface location, not the pick at depth along the deviated well path.

The data are from the Alberta Plains where deformation of the Cambrian sedimentary succession is relatively minor. All points are east of the deformation front at a given latitude. Thus, rocks should not be in a thrusted or structurally duplicated position. Therefore, each pick should only occur once in any given vertical well.
  Completeness_Report: The tabular dataset includes most of the Cambrian well penetrations in the province of Alberta. All wells that include multiple Cambrian lithostratigraphic horizons are thought to be included; however, in the area of the Swan Hills in west-central Alberta, there may be a number of additional wells that only include a Cambrian System top (i.e., are completed a short distance within the Cambrian succession) since there are many wells in this area that are associated with drilling through the Devonian Swan Hills Formation. The Swan Hills Formation commonly overlies a thin interval of Elk Point Group strata, which in turn rests unconformably on the Cambrian succession.
  Positional_Accuracy
    Horizontal_Positional_Accuracy
   Horizontal_Positional_Accuracy_Report: The horizontal datum for the well locations is the North American Datum of 1983 (NAD83).

The X and Y coordinates for stratigraphic pick locations are in 10TM (Forest). The horizontal positional accuracy is unknown.
    Vertical_Positional_Accuracy
   Vertical_Positional_Accuracy_Report: The vertical datum for elevations in this data set is the Canadian Geodetic Vertical Datum of 1928 (CGVD28).

In vertical wells, the subsurface elevation of a pick in a well, measured with respect to sea level, is calculated by taking the elevation of the kelly bushing (on the drilling platform) and subtracting the measured depth of the pick on the geophysical well log.

Some uncertainty in the vertical depth of the pick will result if the borehole is not entirely vertical. In general, the amount of vertical depth due to deviations from the vertical in boreholes is deemed negligible with respect to other potential sources of vertical error in this study. In the case of non-vertical wells, the deviation survey from SLB's Petra was used to calculate the position of the stratigraphic pick along the well path. The deviation survey uses the measurements of depth, inclination, and azimuth, and a minimum curvature method to interpolate the position of the stratigraphic pick along the non-vertical well path. The position of the stratigraphic pick on a non-vertical well path is therefore dependent upon the number of measurements of inclination and azimuth at depth during the time of drilling.

Perhaps the greatest source of vertical uncertainty in this study is potential error in the elevation of the kelly bushing (KB). Any errors in surveying the ground elevation of the well site can result in vertical error. In addition, once the ground elevation is determined, the site is usually prepared for the drilling rig. If the original survey marker is disturbed or moved, this can result in potential vertical errors. The KB elevation is usually derived from adding the height of the drilling platform above the ground surface to the survey ground elevation. If this is not done correctly, it can introduce vertical error in the KB elevation, which is then propagated in the measured depth to the pick and the pick elevation.

Although incorrect KB elevation data can be difficult to detect, the data were screened by comparing the ground elevation and the KB elevation (derrick height) for each well. An acceptable range of derrick height (calculated by subtracting ground elevation from KB elevation) of zero to eleven metres was used. Wells with derrick heights outside this range were excluded.

Vertical error in the pick elevation value can also result from human error resulting from uncertainty or incorrect placement of the pick on the well logs. The occurrence and magnitude of this error is difficult to identify, but comparison with existing published pick datasets and checks for internal consistency (such as identification of global and local outliers using statistical methods and gridding data while picking) minimized this source of error as much as possible.
  Lineage
    Source_Information
      Source_Citation
        Citation_Information
          Originator: Alberta Geological Survey
          Originator: Alberta Research Council
          Originator: Canadian Society of Petroleum Geologists
          Publication_Date: 1994
          Title: Geological Atlas of the Western Canada Sedimentary Basin
          Geospatial_Data_Presentation_Form: atlas
          Series_Information
            Series_Name: Special Report
            Issue_Identification: SPE 004
          Publication_Information
            Publication_Place: Edmonton, Alberta, Canada
            Publisher: Alberta Geological Survey
          Other_Citation_Details: Compiled by Grant Mossop and Irina Shetsen.
   Source_Scale_Denominator: 
   Type_of_Source_Media: online
        Source Time Period of Content
          Time Period Information
            Single Date/Time
       Calendar_Date: 1994
     Source_Currentness_Reference: publication date
     Source_Citation_Abbreviation: SPE 004
     Source_Contribution: Cambrian lithostratigraphic correlations from SPE 004 (e.g., cross-section figures) were used as a framework/foundation from which we made or correlations. Our lithostratigraphic picks may differ in a given well based on our interpretations.
    Process_Step
   Process_Description: The stratigraphic picks were made in SLB’s geological software Petra and Kingdom using wireline-log correlations, core observations, and existing regional stratigraphic frameworks, as described and illustrated in the associated Open File Report 2026-06: Cambrian Lithostratigraphy and Regional Correlations in the Alberta Basin. The stratigraphic pick data were exported from Kingdom, and a quality control measure was taken to look for data busts by comparing each well’s kelly bushing (KB) elevation to its ground level elevation (busts can result in incorrect subsea values for the picks).
   Process_Date: 20260601
  Data_Quality_Information: 
Spatial_Data_Organization_Information: 
Spatial_Reference_Information: 
Entity_and_Attribute_Information: 
Detailed_Description:
Entity_Type:
Entity_Type_Label: DIG 2026-0012 Lithostratigraphic picks
Entity_Type_Definition: This dataset includes lithostratigraphic picks for the Cambrian succession in Alberta. It also includes the informal "Pika marker", which is used to mark the boundary between the Middle Cambrian Earlie Formation and the Upper Cambrian Deadwood Formation.
Entity_Type_Definition_Source: Alberta Geological Survey

Attribute:
Attribute_Label: UWI
Attribute_Definition_Source: Alberta Geological Survey
Attribute_Definition: Unique identifier assigned by the AER to a licensed wellbore as described in AER Directive 059.

Attribute:
Attribute_Label: Licence_no 
Attribute_Definition_Source: Alberta Geological Survey
Attribute_Definition: Unique well license assigned by the AER to a wellbore in Alberta. 

Attribute:
Attribute_Label: E_10TM83
Attribute_Definition_Source: Alberta Geological Survey
Attribute_Definition: Easting, 10 TM, NAD83, central meridian -115º, of a stratigraphic pick along a wellbore.

Attribute:
Attribute_Label: N_10TM83
Attribute_Definition_Source: Alberta Geological Survey
Attribute_Definition: Northing, 10 TM, NAD83, central meridian -115º, of a stratigraphic pick along a wellbore.

Attribute:
Attribute_Label: KB_elev
Attribute_Definition_Source: Alberta Geological Survey
Attribute_Definition: Elevation of the well's kelly bushing in metres above sea level, Canadian Geodetic Vertical Datum of 1928.  

Attribute:
Attribute_Label: Geol_name
Attribute_Definition_Source: Alberta Geological Survey
Attribute_Definition: Name of a geological unit top or marker.

Attribute:
Attribute_Label: El_masl28
Attribute_Definition_Source: Alberta Geological Survey
Attribute_Definition: Elevation, metres above sea level, Canadian Geodetic Vertical Datum of 1928.

Attribute:
Attribute_Label: TVD_m
Attribute_Definition_Source: Alberta Geological Survey
Attribute_Definition: True vertical depth, in metres, of a stratigraphic pick.

Attribute:
Attribute_Label: MD_m
Attribute_Definition_Source: Alberta Geological Survey
Attribute_Definition: Measured depth, in metres, of a stratigraphic pick along a wellbore.

Attribute:
Attribute_Label: Publisher
Attribute_Definition_Source: Alberta Geological Survey
Attribute_Definition: Organization that published the dataset.
  Distribution_Information
    Distributor
      Contact_Information
        Contact_Organization_Primary
          Contact_Organization: Alberta Geological Survey
          Contact_Person: AGS Information Manager
        Contact_Position: AGS Information Manager
        Contact_Address
          Address_Type: mailing and physical
          Address: Alberta Energy Regulator
          Address: 2nd Floor, Twin Atria Building
          Address: 4999-98 Avenue NW
          City: Edmonton
          State_or_Province: Alberta
          Postal_Code: T6B 2X3
          Country: Canada
        Contact_Voice_Telephone: (780) 638-4491
        Contact_Facsimile_Telephone: (780) 422-1459
        Contact_Electronic_Mail_Address: AGS-Info@aer.ca
        Hours_of_Service: 8:00 a.m. to 12:00 p.m. and 1:00 p.m. to 4:30 p.m.
Distribution_Liability: The Alberta Energy Regulator / Alberta Geological Survey (AER/AGS) licenses this information under the Open Government License - Alberta. Any references to proprietary software in our documentation, and/or any use of proprietary data formats in our releases, do not constitute endorsement by the AER/AGS of any manufacturer's product.
  Metadata_Reference_Information
    Metadata_Date: 20261109
    Metadata_Contact
      Contact_Information
        Contact_Organization_Primary
          Contact_Organization: Alberta Geological Survey
          Contact_Person: AGS Information Manager
        Contact_Position: AGS Information Manager
        Contact_Address
          Address_Type: mailing and physical
          Address: Alberta Energy Regulator
          Address: 2nd Floor, Twin Atria Building
          Address: 4999-98 Avenue NW
          City: Edmonton
          State_or_Province: Alberta
          Postal_Code: T6B 2X3
          Country: Canada
        Contact_Voice_Telephone: (780) 638-4491
        Contact_Facsimile_Telephone: (780) 422-1459
        Contact_Electronic_Mail_Address: AGS-Info@aer.ca
        Hours_of_Service: 8:00 a.m. to 12:00 p.m. and 1:00 p.m. to 4:30 p.m.
    Metadata_Standard_Name: FGDC Content Standard for Digital Geospatial Metadata
    Metadata_Standard_Version: FGDC-STD-001-1998
    Metadata_Time_Convention: local time
    Metadata_Access_Constraints: none
    Metadata_Use_Constraints: none
