Identification
Information:
Citation:
Citation
Information:
Originator:
Alberta
Energy Regulator
Originator:
Alberta
Geological Survey
Originator:
Atkinson,
L.A.
Originator:
Pawley,
S.M.
Originator:
Andriashek,
L.D.
Originator:
Hartman,
G.M.D.
Originator:
Utting,
D.J.
Originator:
Atkinson,
N.
Publication
Date: 2020
Title:
Bedrock
Topography of Alberta, Version 2
Edition:
v.2
Geospatial
Data Presentation Form: map
Series
Information:
Series
Name: Map
Issue
Identification: MAP
610
Publication
Information:
Publication
Place: Edmonton,
Alberta, Canada
Publisher:
Alberta
Geological Survey
Other
Citation Details: ISBN:978-1-4601-4922-5
Online
Linkage: http://www.ags.gov.ab.ca/publications/MAP/PDF/MAP_610.pdf
Description:
Abstract:
This map depicts the new 1:1 000 000 bedrock topography map of Alberta prepared by the Alberta Geological Survey (AGS). This map updates the bedrock topography portrayed in AGS Map 602.
The bedrock topography of Alberta is the unconformity surface at the top of Upper Cretaceous and Paleogene bedrock and reveals geomorphic features created by Paleogene to Recent river systems and Quaternary glaciation.
In this work, Alberta’s bedrock topography is generated using a machine learning approach to combine numerous subsurface point datasets of varying quality and coverage with 39 geologic (e.g., bedrock and surficial geology) and topographic predictors (e.g., physiographic regions and relative height in the landscape). Previously published information from AGS maps and reports, as well as newly generated data, were used as input point data. A stack of raster-based predictors was used to provide auxiliary information to support the bedrock topography input data by incorporating the statistical relationships between the geological and geomorphological characteristics of Alberta. Integration of multiple datasets and predictors in the Extremely Randomized Trees algorithm resulted in a bedrock topography surface that honours both the subsurface data and the geological interpretation across multiple settings and throughout a diverse range of surficial environments.
Improving the accuracy of the bedrock topography surface is necessary as it represents an important unconformity upon which Neogene-Quaternary sediments were deposited. Knowledge of the position and thickness of these sediments is critical for management of groundwater, aggregate, and energy resources, as well as other land-use applications. The bedrock topography surface is also an important digital product, as it provides the lowermost bounding surface for modelled Neogene-Quaternary sediment units, and is the uppermost bounding surface for bedrock units modelled in the Geological Framework of Alberta. The bedrock topography grid represented in AGS Map 610 is available in AGS Digital Data 2020-0022.
Purpose:
To update
previous reconstructions of the bedrock topography of Alberta.
Supplemental
Information: Language:
In English;
Time
Period of Content:
Time
Period Information:
Range
of Dates/Times:
Beginning
Date: 2018
Ending
Date: 2020
Currentness Reference: compilation date
Status:
Progress:
Complete
Maintenance
and Update Frequency: None
planned
Spatial
Domain:
Bounding
Coordinates:
West
Bounding Coordinate: -120
East
Bounding Coordinate: -110
North
Bounding Coordinate: 60
South
Bounding Coordinate: 49
Keywords:
Theme:
Theme
Keyword Thesaurus: none
Theme
Keyword: bedrock
topography
Theme
Keyword: buried
valleys
Theme
Keyword: geology
Theme
Keyword: mapping
Theme
Keyword: numerical
modelling
Theme
Keyword: preglacial drainage
Theme
Keyword: preglacial topography
Theme
Keyword: subsurface
Theme
Keyword: thalwegs
Place:
Place
Keyword Thesaurus: none
Place
Keyword: 72e
Place
Keyword: 72l
Place
Keyword: 72m
Place
Keyword: 73d
Place
Keyword: 73e
Place
Keyword: 73l
Place
Keyword: 73m
Place
Keyword: 74d
Place
Keyword: 74e
Place
Keyword: 74l
Place
Keyword: 74m
Place
Keyword: 82g
Place
Keyword: 82h
Place
Keyword: 82i
Place
Keyword: 82j
Place
Keyword: 82n
Place
Keyword: 82o
Place
Keyword: 82p
Place
Keyword: 83a
Place
Keyword: 83b
Place
Keyword: 83c
Place
Keyword: 83d
Place
Keyword: 83e
Place
Keyword: 83f
Place
Keyword: 83g
Place
Keyword: 83h
Place
Keyword: 83i
Place
Keyword: 83j
Place
Keyword: 83k
Place
Keyword: 83l
Place
Keyword: 83m
Place
Keyword: 83n
Place
Keyword: 83o
Place
Keyword: 83p
Place
Keyword: 84a
Place
Keyword: 84b
Place
Keyword: 84c
Place
Keyword: 84d
Place
Keyword: 84e
Place
Keyword: 84f
Place
Keyword: 84g
Place
Keyword: 84h
Place
Keyword: 84i
Place
Keyword: 84j
Place
Keyword: 84k
Place
Keyword: 84l
Place
Keyword: 84m
Place
Keyword: 84n
Place
Keyword: 84o
Place
Keyword: 84p
Place
Keyword: alberta
Place
Keyword: canada
Access
Constraints: Public
Use
Constraints:
Acknowledgement of the Alberta Energy Regulator/Alberta
Geological Survey as the originator/source of this information is required as
described in the Open Government License - Alberta.
Point
of Contact:
Contact
Information:
Contact
Organization Primary:
Contact
Organization: Alberta
Geological Survey
Contact
Person: AGS
Information Manager
Contact
Position: AGS
Information Manager
Contact
Address:
Address
Type: mailing
and physical
Address:
Alberta
Energy Regulator
Address:
4th Floor,
Twin Atria Building
Address:
4999-98
Avenue NW
City:
Edmonton
State
or Province: Alberta
Postal
Code: T6B
2X3
Country:
Canada
Contact
Voice Telephone: (780)
638-4491
Contact
Facsimile Telephone: (780)
422-1459
Contact
Electronic Mail Address: AGS-Info@aer.ca
Hours
of Service: 8:00
a.m. to 12:00 p.m. and 1:00 p.m. to 4:30 p.m.
Cross
Reference:
Citation
Information:
Originator:
Alberta
Energy Regulator
Originator:
Alberta
Geological Survey
Originator:
MacCormack,
K.E.
Originator:
Atkinson,
N.
Originator:
Lyster, S.
Publication
Date: 2015
Title:
Bedrock
Topography of Alberta
Geospatial
Data Presentation Form: map
Series
Information:
Series
Name: Map
Issue
Identification: MAP
602
Publication
Information:
Publication
Place: Edmonton,
Alberta, Canada
Publisher:
Alberta
Geological Survey
Other
Citation Details: Scale
1:1000000. ISBN: 978-1-4601-0121-6
Online
Linkage: https://www.ags.aer.ca
Cross
Reference:
Citation
Information:
Originator:
Alberta
Energy Regulator
Originator:
Alberta
Geological Survey
Publication
Date: 2020
Title:
Bedrock
Topography of Alberta, Version 2 (gridded data, ASCII format)
Edition:
v.2
Geospatial
Data Presentation Form: raster
digital data
Series
Information:
Series
Name: Digital
Data
Issue
Identification: DIG
2020-0022
Publication
Information:
Publication
Place: Edmonton,
Alberta
Publisher:
Alberta
Geological Survey
Other
Citation Details: Scale
1:1 million
Online
Linkage: https://www.ags.aer.ca
Cross
Reference:
Citation
Information:
Originator:
Alberta
Energy Regulator
Originator:
Alberta
Geological Survey
Publication
Date: 2020
Title:
Sediment
Thickness of Alberta, Version 2 (gridded data, ASCII format)
Edition:
v.2
Geospatial
Data Presentation Form: raster
digital data
Series
Information:
Series
Name: Digital
Data
Issue
Identification: DIG
2020-0023
Publication
Information:
Publication
Place: Edmonton,
Alberta
Publisher:
Alberta
Geological Survey
Other
Citation Details: Scale
1:1 million
Online
Linkage: https://www.ags.aer.ca
Cross
Reference:
Citation
Information:
Originator:
Alberta
Energy Regulator
Originator:
Alberta
Geological Survey
Originator:
Atkinson,
L.A.
Originator:
Pawley,
S.M.
Originator:
Andriashek,
L.D.
Originator:
Hartman,
G.M.D.
Originator:
Utting,
D.J.
Originator:
Atkinson,
N.
Publication
Date: 2020
Title:
Sediment
Thickness of Alberta, Version 2
Edition:
v.2
Geospatial
Data Presentation Form: map
Series
Information:
Series
Name: Map
Issue
Identification: MAP
611
Publication
Information:
Publication
Place: Edmonton,
Alberta, Canada
Publisher:
Alberta
Geological Survey
Other
Citation Details: ISBN:978-1-4601-4923-2
Online
Linkage: https://www.ags.aer.ca
Data
Quality Information:
Attribute
Accuracy:
Attribute
Accuracy Report:
Compiled bedrock topography picks (elevation points with X,
Y, Z coordinates) used to generate the bedrock topography gridded surface were
of varying quality with some point data considered to be relatively low
quality. Input data were checked for obvious errors, including incorrect or
ambiguous lithological descriptions, elevation values, and anomalous location
information. Apparent errors were flagged and compared with higher quality data
where it was available, i.e., moderate-to high-quality AGS boreholes and field
data, geophysical logs, and previously published geological and hydrogeological
maps, interpreted contours, and synthetic data points. Where no higher quality
data were available to validate flagged records, the data point was rejected.
Contour and synthetic data were also used to supplement point data in areas of
limited data coverage or to help better constrain the bedrock topography
gridded surface.
Logical
Consistency Report:
Bedrock topography gridded data portrayed on this map are
available in AGS Digital Data 2020-2022. The gridded data indicate the elevation
of the bedrock topography in metres above sea level. The grid was exported as a
continuous surface in ArcGIS ASCII grid format. The grid cell spacing is 500 m
by 500 m, and any grid cells with a null value have been assigned the value
-9999.
Completeness
Report:
Bedrock topography picks that were identified as outliers by
an AGS geologist were excluded from the modelling process. All high-quality
data were used to model the bedrock topography gridded surface and lower
quality data were removed if the pick conflicted with a high-quality data
point, the point was deemed an outlier, or no high-quality data was available
to validate the low-quality data point.
Positional
Accuracy:
Horizontal
Positional Accuracy:
Horizontal
Positional Accuracy Report:
Bedrock topography picks used to generate the gridded
surface were from a variety of sources that have inherent location errors. At
the 500 m grid cell size the bedrock topography was rendered at, any horizontal
positional error will have little impact on the accuracy of the grid
considering this is a provincial-scale grid and not intended for local-scale
studies.
Vertical
Positional Accuracy:
Vertical
Positional Accuracy Report:
The vertical positional error of the bedrock topography grid
is a function of the quality of the pick set, including data density, the
surface complexity (i.e., topographic variability), and the removal of points
from the pick set that are identified as outliers. The occurrence of vertical
errors has been mitigated by ensuring the bedrock topography picks were
estimated from the same land surface datum, assessing the quality of the data,
and then geostatistically evaluating the data points
to identify and remove outliers.
Lineage:
Source
Information:
Source
Citation:
Citation
Information:
Originator:
Alberta
Energy Regulator
Originator:
Alberta
Geological Survey
Publication
Date: 2020
Title:
Bedrock
Topography of Alberta, Version 2 (gridded data, ASCII format)
Edition:
v.2
Geospatial
Data Presentation Form: raster
digital data
Series
Information:
Series
Name: Digital
Data
Issue
Identification: DIG
2020-0022
Publication
Information:
Publication
Place: Edmonton,
Alberta
Publisher:
Alberta
Geological Survey
Other
Citation Details: Scale
1:1 million
Online
Linkage: I:\GIS\Geoscience\bedrock\province\1M\btopo_tm_v2.asc
Source
Scale Denominator: 0
Type
of Source Media: online
Source
Time Period of Content:
Time
Period Information:
Range
of Dates/Times:
Beginning
Date: 2018
Ending
Date: 2020
Source
Currentness Reference: current
Source
Citation Abbreviation: bedrock
topography grid
Source
Contribution: This
grid is the bedrock topography of Alberta.
Process
Step:
Process
Description:
Step 1: (Input point data) A bedrock topography pick is a point defined in three dimensions (X, Y, and Z). Picks were compiled from previous AGS projects and newly generated data created by AGS geologists. The compiled bedrock topography picks were defined from drillholes and site descriptions collected by AGS geologists, geophysical logs from oil and gas wells, historical information from AGS reports, university theses as well as reports written by external geoscience professionals, geotechnical boreholes submitted by industry partners, outcrops located on provincial imagery, water well records from the Alberta Water Well Information Database, contour information compiled from existing bedrock topography and hydrogeological maps of varying quality, and synthetic control points. Points that were considered outliers by an AGS geologist were removed from the dataset. The remaining 141 882 bedrock topography picks were used as input into the machine learning algorithm (outlined below).
Step 2: (Input predictors) A stack of raster-based predictors were used to provide auxiliary information to support the bedrock topography mapping by using statistical relationships between the geological and geomorphological characteristics of the region and sediment thickness. A 1:20 000 scale provincial DEM was used as the primary source of topographic information. This DEM was used to generate a suite of morphometric derivatives based on scripts using the ‘Rsagacmd’ package in the R statistical programming language, used in conjunction with the open-source SAGA-GIS software. The calculated morphometric parameters include those that describe: (1) local morphology; (2) regional relief characteristics; and (3) topographic wetness. The terrain-related predictors were augmented with predictors that allow spatial autocorrelation to be accounted for in the modelling process, including x/y spatial coordinates and known buried channel thalwegs.
Step 3: (Machine learning) The Extremely Randomized Trees (XRT) algorithm in the R package ‘ranger’ (Wright and Ziegler, 2017) was used for the spatial prediction. XRT is a type of Random Forest model that constructs a ‘forest’ of uncorrelated decision trees on random subsets of the training data. Each tree produces a prediction and the final prediction is chosen by averaging (for regression) or majority voting (for classification). In contrast to traditional Random Forests, XRT further attempts to reduce model variance by choosing from several randomly drawn thresholds in each predictor when splitting a node. The XRT model was trained from the pick data using the measured thickness of the unconsolidated sediments as the response variable and the values of the raster-based predictors at the same locations. These predictors were augmented by additional distance-based features and spatial lag variables from neighbouring pick locations. A forest of 500 trees was used in the model, and the hyperparameters specifying the number of predictors that are randomly available for each split, and the minimum number of observations that are permissible in a leaf-node were optimized using nested cross-validation with a grid-search strategy.
Step 4: (Bedrock topography) The bedrock topography was derived by subtracting the modelled sediment thickness (using step 2 and 3 above) from the land surface digital elevation model. The land surface DEM was generated at a 500 m grid cell size using the aggregate tool in ArcGIS to resample the DEM at a coarser resolution that would be appropriate for a provincial-scale model. The bedrock topography gridded surface was rendered at the same 500 m grid cell size resolution, which is intended for provinical-scale investigations and not applicable for site specific studies. The bedrock topography surface grid was produced in Transverse Mercator projection using the North American Datum 1983 (NAD83).
Process
Date: 2020
Distribution
Information:
Distributor:
Contact
Information:
Contact
Organization Primary:
Contact
Organization: Alberta
Geological Survey
Contact
Person: AGS
Information Manager
Contact
Position: AGS
Information Manager
Contact
Address:
Address
Type: mailing
and physical
Address:
Alberta
Energy Regulator
Address:
4th Floor,
Twin Atria Building
Address:
4999-98
Avenue NW
City:
Edmonton
State
or Province: Alberta
Postal
Code: T6B
2X3
Country:
Canada
Contact
Voice Telephone: (780)
638-4491
Contact
Facsimile Telephone: (780)
422-1459
Contact
Electronic Mail Address: AGS-Info@aer.ca
Hours
of Service: 8:00
a.m. to 12:00 p.m. and 1:00 p.m. to 4:30 p.m.
Distribution
Liability:
The Alberta Energy Regulator/Alberta Geological Survey
(AER/AGS) licenses this information under the Open Government License -
Alberta. Any references to proprietary software in our documentation, and/or
any use of proprietary data formats in our releases, do not constitute
endorsement by the AER/AGS of any manufacturer's product.
Metadata
Reference Information:
Metadata
Date: 20201005
Metadata
Contact:
Contact
Information:
Contact
Organization Primary:
Contact
Organization: Alberta
Geological Survey
Contact
Person: AGS
Information Manager
Contact
Position: AGS
Information Manager
Contact
Address:
Address
Type: mailing
and physical
Address:
Alberta
Energy Regulator
Address:
4th Floor,
Twin Atria Building
Address:
4999-98
Avenue NW
City:
Edmonton
State
or Province: Alberta
Postal
Code: T6B
2X3
Country:
Canada
Contact
Voice Telephone: (780)
638-4491
Contact
Facsimile Telephone: (780)
422-1459
Contact
Electronic Mail Address: AGS-Info@aer.ca
Hours
of Service: 8:00
a.m. to 12:00 p.m. and 1:00 p.m. to 4:30 p.m.
Metadata
Standard Name: FGDC
Content Standard for Digital Geospatial Metadata
Metadata
Standard Version: FGDC-STD-001-1998
Metadata
Time Convention: local
time
Metadata
Access Constraints: none
Metadata
Use Constraints: none