- Identification Information:
- Citation:
- Citation Information:
- Originator: Alberta Energy and Utilities Board
- Originator: Alberta Geological Survey
- Originator: Lemay, T.G.
- Publication Date: 200709
- Title: Surface water chemistry data from the Athabasca Oil sands in-situ area - tabular data.
- Geospatial Data Presentation Form: database
- Series Information:
- Series Name: Digital Data
- Issue Identification: DIG 2007-0076
- Publication Information:
- Publication Place: Edmonton, Alberta, Canada
- Publisher: Alberta Geological Survey
- Online Linkage: http://www.ags.gov.ab.ca/publications/DIG/ZIP/DIG_2007_0076.zip
- Description:
- Abstract:
- The dataset contains the results of analyses of surface water samples collected by AGS in the summer of 1999. Three lakes, three creeks, one stream and two rivers were sampled as part of a water sampling program carried out by AGS in the Athabasca Oil Sands in-situ area of Alberta. This area extends from approximately 55.34 degrees north latitude to 55.96 degrees north latitude, and 110.5 degrees west longitude to 111.8 degrees west longitude. The datum is NAD83. The dataset contains information on laboratory measured pH and conductivity, major, minor and trace element concentrations, as well as stable isotope ratio values of oxygen and hydrogen. AGS staff collected the samples using a discrete sampling method. The sample bottle was dipped into the surface water body and partially filled with water, rinsed and the water was discarded. The bottle was then filled and capped. The sample was subsequently filtered on site using a 0.45 micron filter. A sample was acidified for minor and trace-element analysis. Separate samples were collected for stable-isotope analysis. The major, minor and trace-element concentrations were determined by Norwest Labs of Edmonton. The stable isotope values were determined by the University of Calgary stable-isotope lab. The data are as they were received from the laboratories. A change in focus for the second year of the program meant much of the data were not included in the final report, and so were not interpreted to any extent. The data have not been processed or modified.
- Purpose: To provide information on the surface water chemistry and stable isotope values.
- Supplemental Information:
- In English. The database has six tables and one query. The tables in alphabetical order are Analytical_Methods, Chemistry_Data, Detection_limit_summary, Field_Definitions, Location_information, and Units_summary. The table properties field provides information on the tables and their contents. The query is called qry_Summary_query_to_provide_location_and_chemistry_da and combines the location information contained in the Location_Information table with the Chemistry_Data table
- Time Period of Content:
- Time Period Information:
- Range of Dates/Times:
- Beginning Date: 19990720
- Ending Date: 19990722
- Currentness Reference: ground condition
- Status:
- Progress: Complete
- Maintenance and Update Frequency: None planned
- Spatial Domain:
- Bounding Coordinates:
- West Bounding Coordinate: -111.8
- East Bounding Coordinate: -110.5
- North Bounding Coordinate: 55.96
- South Bounding Coordinate: 55.34
- Keywords:
- Theme:
- Theme Keyword Thesaurus: none
- Theme Keyword: chemistry
- Theme Keyword: creek
- Theme Keyword: lakes
- Theme Keyword: rivers
- Theme Keyword: stable isotopes
- Theme Keyword: streams
- Theme Keyword: surface water
- Theme Keyword: water chemistry
- Place:
- Place Keyword Thesaurus: none
- Place Keyword: 73m
- Place Keyword: alberta
- Place Keyword: athabasca
- Place Keyword: athabasca oil sands
- Place Keyword: canada
- Access Constraints: Public
- Use Constraints:
- Acknowledgement of the Alberta Energy Regulator/Alberta Geological Survey as the originator/source of this information is required as described in the Open Government License - Alberta.
- Point of Contact:
- Contact Information:
- Contact Organization Primary:
- Contact Organization: Alberta Geological Survey
- Contact Person: Publications and Marketing Advisor
- Contact Position: Publications and Marketing Advisor
- Contact Address:
- Address Type: mailing and physical
- Address: Alberta Energy Regulator
- Address: 4th Floor, Twin Atria Building
- Address: 4999-98 Avenue NW
- City: Edmonton
- State or Province: Alberta
- Postal Code: T6B 2X3
- Country: Canada
- Contact Voice Telephone: (780) 422-1927
- Contact Facsimile Telephone: (780) 422-1918
- Contact Electronic Mail Address: AGS-Info@aer.ca
- Hours of Service: 8:00 a.m. to 12:00 p.m. and 1:00 p.m. to 4:30 p.m.
- Data Set Credit: GISmo Solutions Ltd. carrried out the digitization of the hard copy map.
- Native Data Set Environment: Microsoft Windows XP Version 5.1 (Build 2600) Service Pack 2; ESRI ArcCatalog 9.0.0.535
- Data Quality Information:
- Attribute Accuracy:
- Attribute Accuracy Report:
- Major, minor and trace element water chemistry concentration value error values are not known. Error values for the stable isotope ratio values have established error values.
- Logical Consistency Report:
- The data were originally contained within an MS Excel spreadsheet. They were subsequently imported into an MS Access database using a series of update and append queries. In order to release the data as a digital file, the surface water chemistry data were extracted to the simplified data model used for this digital data release. The data in the database were checked against the original spreadsheet values in order to confirm that the values were consistent with the original spreadsheet values. A unique ID was applied to the samples to avoid any duplication of records. This ID was used to link the location information table to the chemistry data table. Each ID appears only once. Sampling was conducted by two field parties. The SS99-* samples were collected by one party and the GJ99-* samples were collected by the second party. The GJ99-* samples were filtered and prepared for lab submission in the field, while the SS99-* samples were filtered and prepared for lab submission following daily field activities. There is one site where a sample for stable isotope analysis was not submitted.
- Completeness Report:
- All of the data available for the collected surface water samples have been included. Stable isotope values for one of the sample sites is missing. This is because a sample was not submitted for this site for stable isotopic analysis.
- Positional Accuracy:
- Horizontal Positional Accuracy:
- Horizontal Positional Accuracy Report:
- Global positioning system technology was used to determine the latitude and longitude values for the sample locations.
- Quantitative Horizontal Positional Accuracy Assessment:
- Horizontal Positional Accuracy Value: 3
- Horizontal Positional Accuracy Explanation:
- Potential error in the horizontal position value at this period of time should be approximately plus or minus 3 m.
- Vertical Positional Accuracy:
- Vertical Positional Accuracy Report: Vertical position was not recorded.
- Lineage:
- Process Step:
- Process Description:
- As part of a project funded by Western Economic Diversification under the Western Economic Partnership Agreement, the Alberta Geological Survey conducted a water sampling program in the Athabasca oilsands in-situ area in the summer of 1999. These samples included water well and surface water samples. The surface water samples were analyzed for chemical, and stable isotopic composition. These data have not been interpreted or analyzed to any extent whatsoever. They have been input into an MS Access database from original spreadsheet files. The data from the database file have been subsequently extracted into a simplified data model for release as a digital dataset.
- Process Date: 200708
- Spatial Data Organization Information:
- Direct Spatial Reference Method: Vector
- Point and Vector Object Information:
- SDTS Terms Description:
- SDTS Point and Vector Object Type: G-polygon
- Point and Vector Object Count: 9
- Spatial Reference Information:
- Horizontal Coordinate System Definition:
- Geographic:
- Geographic Coordinate Units: Decimal degrees
- Latitude Resolution: 0.000001
- Longitude Resolution: 0.000001
- Geodetic Model:
- Horizontal Datum Name: North American Datum of 1983
- Ellipsoid Name: Geodetic Reference System 80
- Semi-Major Axis: 6378137.000000
- Denominator of Flattening Ratio: 298.257222
- Entity and Attribute Information:
- Detailed Description:
- Entity Type:
- Entity Type Label: Analytical_Methods
- Entity Type Definition: This table summarizes the analytical methods used in analyzing the samples
- Entity Type Definition Source: Alberta Geological Survey
- Attribute:
- Attribute Label: Parameter
- Attribute Definition: Name of the parameter
- Attribute Definition Source: Alberta Geological Survey
- Attribute Domain Values:
- Unrepresentable Domain: Values do not exist in a known, predefined set
- Attribute:
- Attribute Label: Laboratory
- Attribute Definition: Laboratory that performed the analysis
- Attribute Definition Source: Alberta Geological Survey
- Attribute Domain Values:
- Unrepresentable Domain: Values do not exist in a known, predefined set
- Attribute:
- Attribute Label: Package
- Attribute Definition: Laboratory description of the analytical package
- Attribute Definition Source: Alberta Geological Survey
- Attribute Domain Values:
- Unrepresentable Domain: Values do not exist in a known, predefined set
- Attribute:
- Attribute Label: Methodology
- Attribute Definition: Methodology used to analyze the sample
- Attribute Definition Source: Alberta Geological Survey
- Attribute Domain Values:
- Unrepresentable Domain: Values do not exist in a known, predefined set
- Attribute:
- Attribute Label: Reference
- Attribute Definition: Methodology reference
- Attribute Definition Source: Alberta Geological Survey
- Attribute Domain Values:
- Unrepresentable Domain: Values do not exist in a known, predefined set
- Detailed Description:
- Entity Type:
- Entity Type Label: Chemistry_Data
- Entity Type Definition: This table contains the analytical data for the various samples submitted.
- Entity Type Definition Source: Alberta Geological Survey
- Attribute:
- Attribute Label: ID
- Attribute Definition: Unique ID assigned by AGS to the sample
- Attribute Definition Source: Alberta Geological Survey
- Attribute Domain Values:
- Unrepresentable Domain: Values do not exist in a known, predefined set
- Attribute:
- Attribute Label: pH
- Attribute Definition: Laboratory measured pH of the water sample
- Attribute Definition Source: Alberta Geological Survey
- Attribute Domain Values:
- Range Domain:
- Range Domain Minimum: 7.27
- Range Domain Maximum: 8.01
- Attribute Units of Measure: Dimensionless
- Attribute:
- Attribute Label: EC
- Attribute Definition: Laboratory measured electrical conductance of the water sample in [microsiemens/cm]
- Attribute Definition Source: Alberta Geological Survey
- Attribute Domain Values:
- Range Domain:
- Range Domain Minimum: 136
- Range Domain Maximum: 433
- Attribute Units of Measure: microsiemens/cm
- Attribute:
- Attribute Label: CALCIUM_D1
- Attribute Definition: Dissolved calcium in [mg/L] measured as part of the Routine Water package
- Attribute Definition Source: Alberta Geological Survey
- Attribute Domain Values:
- Range Domain:
- Range Domain Minimum: 20.7
- Range Domain Maximum: 56.6
- Attribute Units of Measure: mg/L
- Attribute:
- Attribute Label: MAGNESIUM_D1
- Attribute Definition: Dissolved magnesium in [mg/L] measured as part of the Routine Water package
- Attribute Definition Source: Alberta Geological Survey
- Attribute Domain Values:
- Range Domain:
- Range Domain Minimum: 5.9
- Range Domain Maximum: 16
- Attribute Units of Measure: mg/L
- Attribute:
- Attribute Label: SODIUM_D1
- Attribute Definition: Dissolved sodium in [mg/L] measured as part of the Routine Water package
- Attribute Definition Source: Alberta Geological Survey
- Attribute Domain Values:
- Range Domain:
- Range Domain Minimum: 3.5
- Range Domain Maximum: 24.1
- Attribute Units of Measure: mg/L
- Attribute:
- Attribute Label: Q_POTASSIUM_D1
- Attribute Definition:
- Qualifier '<' to indicate, if used, that the actual concentration of dissolved potassium is less than the reported concentration
- Attribute Definition Source: Alberta Geological Survey
- Attribute Domain Values:
- Enumerated Domain:
- Enumerated Domain Value: Null or Missing
- Enumerated Domain Value Definition: Value equal to reported concentration
- Enumerated Domain Value Definition Source: Alberta Geological Survey
- Enumerated Domain:
- Enumerated Domain Value: <
- Enumerated Domain Value Definition: Value less than reported concentration
- Enumerated Domain Value Definition Source: Alberta Geological Survey
- Attribute:
- Attribute Label: POTASSIUM_D1
- Attribute Definition: Dissolved potassium in [mg/L] measured as part of the Routine Water package
- Attribute Definition Source: Alberta Geological Survey
- Attribute Domain Values:
- Range Domain:
- Range Domain Minimum: 1
- Range Domain Maximum: 2.02
- Attribute Units of Measure: mg/L
- Attribute:
- Attribute Label: Q_IRON_D1
- Attribute Definition:
- Qualifier '<' to indicate, if used, that the actual concentration of dissolved iron is less than the reported concentration
- Attribute Definition Source: Alberta Geological Survey
- Attribute Domain Values:
- Enumerated Domain:
- Enumerated Domain Value: Null or Missing
- Enumerated Domain Value Definition: Value equal to reported concentration
- Enumerated Domain Value Definition Source: Alberta Geological Survey
- Enumerated Domain:
- Enumerated Domain Value: <
- Enumerated Domain Value Definition: Value less than reported concentration
- Enumerated Domain Value Definition Source: Alberta Geological Survey
- Attribute:
- Attribute Label: IRON_D1
- Attribute Definition: Dissolved iron in [mg/L] measured as part of the Routine Water package
- Attribute Definition Source: Alberta Geological Survey
- Attribute Domain Values:
- Range Domain:
- Range Domain Minimum: 0.02
- Range Domain Maximum: 0.2
- Attribute Units of Measure: mg/L
- Attribute:
- Attribute Label: SULPHATE_D
- Attribute Definition: Dissolved sulphate in [mg/L] measured as part of the Routine Water package
- Attribute Definition Source: Alberta Geological Survey
- Attribute Domain Values:
- Range Domain:
- Range Domain Minimum: 0.8
- Range Domain Maximum: 14.2
- Attribute Units of Measure: mg/L
- Attribute:
- Attribute Label: Q_MANGANESE_D1
- Attribute Definition:
- Qualifier '<' to indicate, if used, that the actual concentration of dissolved manganese is less than the reported concentration
- Attribute Definition Source: Alberta Geological Survey
- Attribute Domain Values:
- Enumerated Domain:
- Enumerated Domain Value: Null or Missing
- Enumerated Domain Value Definition: Value equal to reported concentration
- Enumerated Domain Value Definition Source: Alberta Geological Survey
- Enumerated Domain:
- Enumerated Domain Value: <
- Enumerated Domain Value Definition: Value less than reported concentration
- Enumerated Domain Value Definition Source: Alberta Geological Survey
- Attribute:
- Attribute Label: MANGANESE_D1
- Attribute Definition: Dissolved manganese in [mg/L] measured as part of the Routine Water package
- Attribute Definition Source: Alberta Geological Survey
- Attribute Domain Values:
- Range Domain:
- Range Domain Minimum: 0.003
- Range Domain Maximum: 0.029
- Attribute Units of Measure: mg/L
- Attribute:
- Attribute Label: Q_CHLORIDE_D
- Attribute Definition:
- Qualifier '<' to indicate, if used, that the actual concentration of dissolved chloride is less than the reported concentration
- Attribute Definition Source: Alberta Geological Survey
- Attribute Domain Values:
- Enumerated Domain:
- Enumerated Domain Value: Null or Missing
- Enumerated Domain Value Definition: Value equal to reported concentration
- Enumerated Domain Value Definition Source: Alberta Geological Survey
- Enumerated Domain:
- Enumerated Domain Value: <
- Enumerated Domain Value Definition: Value less than reported concentration
- Enumerated Domain Value Definition Source: Alberta Geological Survey
- Attribute:
- Attribute Label: CHLORIDE_D
- Attribute Definition: Dissolved chloride in [mg/L] measured as part of the Routine Water package
- Attribute Definition Source: Alberta Geological Survey
- Attribute Domain Values:
- Range Domain:
- Range Domain Minimum: 0.5
- Range Domain Maximum: 0.5
- Attribute Units of Measure: mg/L
- Attribute:
- Attribute Label: BICARBONATE_D
- Attribute Definition: Dissolved bicarbonate in [mg/L] measured as part of the Routine Water package
- Attribute Definition Source: Alberta Geological Survey
- Attribute Domain Values:
- Range Domain:
- Range Domain Minimum: 86
- Range Domain Maximum: 301
- Attribute Units of Measure: mg/L
- Attribute:
- Attribute Label: T_ALKALINITY
- Attribute Definition: Total alkalinity of the water sample in [mg/L as CaCO3]
- Attribute Definition Source: Alberta Geological Survey
- Attribute Domain Values:
- Range Domain:
- Range Domain Minimum: 70
- Range Domain Maximum: 246
- Attribute Units of Measure: mg/L as CaCO3
- Attribute:
- Attribute Label: HARDNESS
- Attribute Definition: Hardness of the water sample in [mg/L as CaCO3]
- Attribute Definition Source: Alberta Geological Survey
- Attribute Domain Values:
- Range Domain:
- Range Domain Minimum: 75.8
- Range Domain Maximum: 207
- Attribute Units of Measure: mg/L as CaCO3
- Attribute:
- Attribute Label: TDS
- Attribute Definition: Total dissolved solids in [mg/L]
- Attribute Definition Source: Alberta Geological Survey
- Attribute Domain Values:
- Range Domain:
- Range Domain Minimum: 76
- Range Domain Maximum: 255
- Attribute Units of Measure: mg/L
- Attribute:
- Attribute Label: IONIC_BALANCE
- Attribute Definition: Calculated ionic balance
- Attribute Definition Source: Alberta Geological Survey
- Attribute Domain Values:
- Range Domain:
- Range Domain Minimum: 99.3
- Range Domain Maximum: 115
- Attribute Units of Measure: percentage
- Attribute:
- Attribute Label: Q_NO2_NO3-N_D
- Attribute Definition:
- Qualifier '<' to indicate, if used, that the actual concentration of dissolved nitrate+nitrite is less than the reported concentration
- Attribute Definition Source: Alberta Geological Survey
- Attribute Domain Values:
- Enumerated Domain:
- Enumerated Domain Value: Null or Missing
- Enumerated Domain Value Definition: Value equal to reported concentration
- Enumerated Domain Value Definition Source: Alberta Geological Survey
- Enumerated Domain:
- Enumerated Domain Value: <
- Enumerated Domain Value Definition: Value less than reported concentration
- Enumerated Domain Value Definition Source: Alberta Geological Survey
- Attribute:
- Attribute Label: NO2_NO3-N_D
- Attribute Definition: Dissolved nitrate+nitrite in [mg/L]
- Attribute Definition Source: Alberta Geological Survey
- Attribute Domain Values:
- Range Domain:
- Range Domain Minimum: 0.05
- Range Domain Maximum: 0.57
- Attribute Units of Measure: mg/L
- Attribute:
- Attribute Label: Q_MERCURY_D
- Attribute Definition:
- Qualifier '<' to indicate, if used, that the actual concentration of dissolved mercury is less than the reported concentration
- Attribute Definition Source: Alberta Geological Survey
- Attribute Domain Values:
- Enumerated Domain:
- Enumerated Domain Value: Null or Missing
- Enumerated Domain Value Definition: Value equal to reported concentration
- Enumerated Domain Value Definition Source: Alberta Geological Survey
- Enumerated Domain:
- Enumerated Domain Value: <
- Enumerated Domain Value Definition: Value less than reported concentration
- Enumerated Domain Value Definition Source: Alberta Geological Survey
- Attribute:
- Attribute Label: MERCURY_D
- Attribute Definition: Dissolved mercury in [mg/L]
- Attribute Definition Source: Alberta Geological Survey
- Attribute Domain Values:
- Range Domain:
- Range Domain Minimum: 0.0001
- Range Domain Maximum: 0.0001
- Attribute Units of Measure: mg/L
- Attribute:
- Attribute Label: Q_ARSENIC_D1
- Attribute Definition:
- Qualifier '<' to indicate, if used, that the actual concentration of dissolved arsenic is less than the reported concentration as measured by AAS
- Attribute Definition Source: Alberta Geological Survey
- Attribute Domain Values:
- Enumerated Domain:
- Enumerated Domain Value: Null or Missing
- Enumerated Domain Value Definition: Value equal to reported concentration
- Enumerated Domain Value Definition Source: Alberta Geological Survey
- Enumerated Domain:
- Enumerated Domain Value: <
- Enumerated Domain Value Definition: Value less than reported concentration
- Enumerated Domain Value Definition Source: Alberta Geological Survey
- Attribute:
- Attribute Label: ARSENIC_D1
- Attribute Definition: Dissolved arsenic in [mg/L] measured by AAS
- Attribute Definition Source: Alberta Geological Survey
- Attribute Domain Values:
- Range Domain:
- Range Domain Minimum: 0.0002
- Range Domain Maximum: 0.0002
- Attribute Units of Measure: mg/L
- Attribute:
- Attribute Label: ALUMINUM_D
- Attribute Definition: Dissolved aluminum in [mg/L] measured by ICP
- Attribute Definition Source: Alberta Geological Survey
- Attribute Domain Values:
- Range Domain:
- Range Domain Minimum: 0.059
- Range Domain Maximum: 0.219
- Attribute Units of Measure: mg/L
- Attribute:
- Attribute Label: Q_ANTIMONY_D
- Attribute Definition:
- Qualifier '<' to indicate, if used, that the actual concentration of dissolved antimony is less than the reported concentration as measured by ICP
- Attribute Definition Source: Alberta Geological Survey
- Attribute Domain Values:
- Enumerated Domain:
- Enumerated Domain Value: Null or Missing
- Enumerated Domain Value Definition: Value equal to reported concentration
- Enumerated Domain Value Definition Source: Alberta Geological Survey
- Enumerated Domain:
- Enumerated Domain Value: <
- Enumerated Domain Value Definition: Value less than reported concentration
- Enumerated Domain Value Definition Source: Alberta Geological Survey
- Attribute:
- Attribute Label: ANTIMONY_D
- Attribute Definition: Dissolved antimony in [mg/L] measured by ICP
- Attribute Definition Source: Alberta Geological Survey
- Attribute Domain Values:
- Range Domain:
- Range Domain Minimum: 0.005
- Range Domain Maximum: 0.005
- Attribute Units of Measure: mg/L
- Attribute:
- Attribute Label: Q_ARSENIC_D2
- Attribute Definition:
- Qualifier '<' to indicate, if used, that the actual concentration of dissolved arsenic is less than the reported concentration as measured by ICP
- Attribute Definition Source: Alberta Geological Survey
- Attribute Domain Values:
- Enumerated Domain:
- Enumerated Domain Value: Null or Missing
- Enumerated Domain Value Definition: Value equal to reported concentration
- Enumerated Domain Value Definition Source: Alberta Geological Survey
- Enumerated Domain:
- Enumerated Domain Value: <
- Enumerated Domain Value Definition: Value less than reported concentration
- Enumerated Domain Value Definition Source: Alberta Geological Survey
- Attribute:
- Attribute Label: ARSENIC_D2
- Attribute Definition: Dissolved arsenic in [mg/L] measured by ICP
- Attribute Definition Source: Alberta Geological Survey
- Attribute Domain Values:
- Range Domain:
- Range Domain Minimum: 0.01
- Range Domain Maximum: 0.01
- Attribute Units of Measure: mg/L
- Attribute:
- Attribute Label: BARIUM_D
- Attribute Definition: Dissolved barium in [mg/L] measured by ICP
- Attribute Definition Source: Alberta Geological Survey
- Attribute Domain Values:
- Range Domain:
- Range Domain Minimum: 0.0038
- Range Domain Maximum: 0.0793
- Attribute Units of Measure: mg/L
- Attribute:
- Attribute Label: Q_BERYLLIUM_D
- Attribute Definition:
- Qualifier '<' to indicate, if used, that the actual concentration of dissolved beryllium is less than the reported concentration as measured by ICP
- Attribute Definition Source: Alberta Geological Survey
- Attribute Domain Values:
- Enumerated Domain:
- Enumerated Domain Value: Null or Missing
- Enumerated Domain Value Definition: Value equal to reported concentration
- Enumerated Domain Value Definition Source: Alberta Geological Survey
- Enumerated Domain:
- Enumerated Domain Value: <
- Enumerated Domain Value Definition: Value less than reported concentration
- Enumerated Domain Value Definition Source: Alberta Geological Survey
- Attribute:
- Attribute Label: BERYLLIUM_D
- Attribute Definition: Dissolved beryllium in [mg/L] measured by ICP
- Attribute Definition Source: Alberta Geological Survey
- Attribute Domain Values:
- Range Domain:
- Range Domain Minimum: 0.0005
- Range Domain Maximum: 0.0005
- Attribute Units of Measure: mg/L
- Attribute:
- Attribute Label: Q_BISMUTH_D
- Attribute Definition:
- Qualifier '<' to indicate, if used, that the actual concentration of dissolved bismuth is less than the reported concentration as measured by ICP
- Attribute Definition Source: Alberta Geological Survey
- Attribute Domain Values:
- Enumerated Domain:
- Enumerated Domain Value: Null or Missing
- Enumerated Domain Value Definition: Value equal to reported concentration
- Enumerated Domain Value Definition Source: Alberta Geological Survey
- Enumerated Domain:
- Enumerated Domain Value: <
- Enumerated Domain Value Definition: Value less than reported concentration
- Enumerated Domain Value Definition Source: Alberta Geological Survey
- Attribute:
- Attribute Label: BISMUTH_D
- Attribute Definition: Dissolved bismuth in [mg/L] measured by ICP
- Attribute Definition Source: Alberta Geological Survey
- Attribute Domain Values:
- Range Domain:
- Range Domain Minimum: 0.007
- Range Domain Maximum: 0.007
- Attribute Units of Measure: mg/L
- Attribute:
- Attribute Label: Q_BORON_D
- Attribute Definition:
- Qualifier '<' to indicate, if used, that the actual concentration of dissolved boron is less than the reported concentration as measured by ICP
- Attribute Definition Source: Alberta Geological Survey
- Attribute Domain Values:
- Enumerated Domain:
- Enumerated Domain Value: Null or Missing
- Enumerated Domain Value Definition: Value equal to reported concentration
- Enumerated Domain Value Definition Source: Alberta Geological Survey
- Enumerated Domain:
- Enumerated Domain Value: <
- Enumerated Domain Value Definition: Value less than reported concentration
- Enumerated Domain Value Definition Source: Alberta Geological Survey
- Attribute:
- Attribute Label: BORON_D
- Attribute Definition: Dissolved boron in [mg/L] measured by ICP
- Attribute Definition Source: Alberta Geological Survey
- Attribute Domain Values:
- Range Domain:
- Range Domain Minimum: 0.002
- Range Domain Maximum: 0.082
- Attribute Units of Measure: mg/L
- Attribute:
- Attribute Label: Q_CADMIUM_D
- Attribute Definition:
- Qualifier '<' to indicate, if used, that the actual concentration of dissolved cadmium is less than the reported concentration as measured by ICP
- Attribute Definition Source: Alberta Geological Survey
- Attribute Domain Values:
- Enumerated Domain:
- Enumerated Domain Value: Null or Missing
- Enumerated Domain Value Definition: Value equal to reported concentration
- Enumerated Domain Value Definition Source: Alberta Geological Survey
- Enumerated Domain:
- Enumerated Domain Value: <
- Enumerated Domain Value Definition: Value less than reported concentration
- Enumerated Domain Value Definition Source: Alberta Geological Survey
- Attribute:
- Attribute Label: CADMIUM_D
- Attribute Definition: Dissolved cadmium in [mg/L] measured by ICP
- Attribute Definition Source: Alberta Geological Survey
- Attribute Domain Values:
- Range Domain:
- Range Domain Minimum: 0.0005
- Range Domain Maximum: 0.0005
- Attribute Units of Measure: mg/L
- Attribute:
- Attribute Label: CALCIUM_D2
- Attribute Definition: Dissolved calcium in [mg/L] measured by ICP
- Attribute Definition Source: Alberta Geological Survey
- Attribute Domain Values:
- Range Domain:
- Range Domain Minimum: 15.9
- Range Domain Maximum: 51.3
- Attribute Units of Measure: mg/L
- Attribute:
- Attribute Label: Q_CHROMIUM_D
- Attribute Definition:
- Qualifier '<' to indicate, if used, that the actual concentration of dissolved chromium is less than the reported concentration as measured by ICP
- Attribute Definition Source: Alberta Geological Survey
- Attribute Domain Values:
- Enumerated Domain:
- Enumerated Domain Value: Null or Missing
- Enumerated Domain Value Definition: Value equal to reported concentration
- Enumerated Domain Value Definition Source: Alberta Geological Survey
- Enumerated Domain:
- Enumerated Domain Value: <
- Enumerated Domain Value Definition: Value less than reported concentration
- Enumerated Domain Value Definition Source: Alberta Geological Survey
- Attribute:
- Attribute Label: CHROMIUM_D
- Attribute Definition: Dissolved chromium in [mg/L] measured by ICP
- Attribute Definition Source: Alberta Geological Survey
- Attribute Domain Values:
- Range Domain:
- Range Domain Minimum: 0.0008
- Range Domain Maximum: 0.001
- Attribute Units of Measure: mg/L
- Attribute:
- Attribute Label: Q_COBALT_D
- Attribute Definition:
- Qualifier '<' to indicate, if used, that the actual concentration of dissolved cobalt is less than the reported concentration as measured by ICP
- Attribute Definition Source: Alberta Geological Survey
- Attribute Domain Values:
- Enumerated Domain:
- Enumerated Domain Value: Null or Missing
- Enumerated Domain Value Definition: Value equal to reported concentration
- Enumerated Domain Value Definition Source: Alberta Geological Survey
- Enumerated Domain:
- Enumerated Domain Value: <
- Enumerated Domain Value Definition: Value less than reported concentration
- Enumerated Domain Value Definition Source: Alberta Geological Survey
- Attribute:
- Attribute Label: COBALT_D
- Attribute Definition: Dissolved cobalt in [mg/L] measured by ICP
- Attribute Definition Source: Alberta Geological Survey
- Attribute Domain Values:
- Range Domain:
- Range Domain Minimum: 0.0007
- Range Domain Maximum: 0.0007
- Attribute Units of Measure: mg/L
- Attribute:
- Attribute Label: COPPER_D
- Attribute Definition: Dissolved copper in [mg/L] measured by ICP
- Attribute Definition Source: Alberta Geological Survey
- Attribute Domain Values:
- Range Domain:
- Range Domain Minimum: 0.002
- Range Domain Maximum: 0.01
- Attribute Units of Measure: mg/L
- Attribute:
- Attribute Label: IRON_D2
- Attribute Definition: Dissolved iron in [mg/L] measured by ICP
- Attribute Definition Source: Alberta Geological Survey
- Attribute Domain Values:
- Range Domain:
- Range Domain Minimum: 0.012
- Range Domain Maximum: 0.352
- Attribute Units of Measure: mg/L
- Attribute:
- Attribute Label: Q_LEAD_D
- Attribute Definition:
- Qualifier '<' to indicate, if used, that the actual concentration of dissolved lead is less than the reported concentration as measured by ICP
- Attribute Definition Source: Alberta Geological Survey
- Attribute Domain Values:
- Enumerated Domain:
- Enumerated Domain Value: Null or Missing
- Enumerated Domain Value Definition: Value equal to reported concentration
- Enumerated Domain Value Definition Source: Alberta Geological Survey
- Enumerated Domain:
- Enumerated Domain Value: <
- Enumerated Domain Value Definition: Value less than reported concentration
- Enumerated Domain Value Definition Source: Alberta Geological Survey
- Attribute:
- Attribute Label: LEAD_D
- Attribute Definition: Dissolved lead in [mg/L] measured by ICP
- Attribute Definition Source: Alberta Geological Survey
- Attribute Domain Values:
- Range Domain:
- Range Domain Minimum: 0.002
- Range Domain Maximum: 0.007
- Attribute Units of Measure: mg/L
- Attribute:
- Attribute Label: LITHIUM_D
- Attribute Definition: Dissolved lithium in [mg/L] measured by ICP
- Attribute Definition Source: Alberta Geological Survey
- Attribute Domain Values:
- Range Domain:
- Range Domain Minimum: 0.002
- Range Domain Maximum: 0.016
- Attribute Units of Measure: mg/L
- Attribute:
- Attribute Label: MAGNESIUM_D2
- Attribute Definition: Dissolved magnesium in [mg/L] measured by ICP
- Attribute Definition Source: Alberta Geological Survey
- Attribute Domain Values:
- Range Domain:
- Range Domain Minimum: 6.46
- Range Domain Maximum: 14.7
- Attribute Units of Measure: mg/L
- Attribute:
- Attribute Label: MANGANESE_D2
- Attribute Definition: Dissolved manganese in [mg/L] measured by ICP
- Attribute Definition Source: Alberta Geological Survey
- Attribute Domain Values:
- Range Domain:
- Range Domain Minimum: 0.0026
- Range Domain Maximum: 0.21
- Attribute Units of Measure: mg/L
- Attribute:
- Attribute Label: Q_MOLYBDENUM_D
- Attribute Definition:
- Qualifier '<' to indicate, if used, that the actual concentration of dissolved molybdenum is less than the reported concentration as measured by ICP
- Attribute Definition Source: Alberta Geological Survey
- Attribute Domain Values:
- Enumerated Domain:
- Enumerated Domain Value: Null or Missing
- Enumerated Domain Value Definition: Value equal to reported concentration
- Enumerated Domain Value Definition Source: Alberta Geological Survey
- Enumerated Domain:
- Enumerated Domain Value: <
- Enumerated Domain Value Definition: Value less than reported concentration
- Enumerated Domain Value Definition Source: Alberta Geological Survey
- Attribute:
- Attribute Label: MOLYBDENUM_D
- Attribute Definition: Dissolved molybdenum in [mg/L] measured by ICP
- Attribute Definition Source: Alberta Geological Survey
- Attribute Domain Values:
- Range Domain:
- Range Domain Minimum: 0.001
- Range Domain Maximum: 0.001
- Attribute Units of Measure: mg/L
- Attribute:
- Attribute Label: Q_NICKEL_D
- Attribute Definition:
- Qualifier '<' to indicate, if used, that the actual concentration of dissolved nickel is less than the reported concentration as measured by ICP
- Attribute Definition Source: Alberta Geological Survey
- Attribute Domain Values:
- Enumerated Domain:
- Enumerated Domain Value: Null or missing
- Enumerated Domain Value Definition: Value equal to reported concentration
- Enumerated Domain Value Definition Source: Alberta Geological Survey
- Enumerated Domain:
- Enumerated Domain Value: <
- Enumerated Domain Value Definition: Value less than reported concentration
- Enumerated Domain Value Definition Source: Alberta Geological Survey
- Attribute:
- Attribute Label: NICKEL_D
- Attribute Definition: Dissolved nickel in [mg/L] measured by ICP
- Attribute Definition Source: Alberta Geological Survey
- Attribute Domain Values:
- Range Domain:
- Range Domain Minimum: 0.001
- Range Domain Maximum: 0.003
- Attribute Units of Measure: mg/L
- Attribute:
- Attribute Label: Q_PHOSPHORUS_D
- Attribute Definition:
- Qualifier '<' to indicate, if used, that the actual concentration of dissolved phosphorus is less than the reported concentration as measured by ICP
- Attribute Definition Source: Alberta Geological Survey
- Attribute Domain Values:
- Enumerated Domain:
- Enumerated Domain Value: Null or Missing
- Enumerated Domain Value Definition: Value equal to reported concentration
- Enumerated Domain Value Definition Source: Alberta Geological Survey
- Enumerated Domain:
- Enumerated Domain Value: <
- Enumerated Domain Value Definition: Value less than reported concentration
- Enumerated Domain Value Definition Source: Alberta Geological Survey
- Attribute:
- Attribute Label: PHOSPHORUS_D
- Attribute Definition: Dissolved phosphorus in [mg/L] measured by ICP
- Attribute Definition Source: Alberta Geological Survey
- Attribute Domain Values:
- Range Domain:
- Range Domain Minimum: 0.03
- Range Domain Maximum: 0.17
- Attribute Units of Measure: mg/L
- Attribute:
- Attribute Label: POTASSIUM_D2
- Attribute Definition: Dissolved potassium in [mg/L] measured by ICP
- Attribute Definition Source: Alberta Geological Survey
- Attribute Domain Values:
- Range Domain:
- Range Domain Minimum: 0.4
- Range Domain Maximum: 1.7
- Attribute Units of Measure: mg/L
- Attribute:
- Attribute Label: Q_SELENIUM_D
- Attribute Definition:
- Qualifier '<' to indicate, if used, that the actual concentration of dissolved selenium is less than the reported concentration as measured by ICP
- Attribute Definition Source: Alberta Geological Survey
- Attribute Domain Values:
- Enumerated Domain:
- Enumerated Domain Value: Null or Missing
- Enumerated Domain Value Definition: Value equal to reported concentration
- Enumerated Domain Value Definition Source: Alberta Geological Survey
- Enumerated Domain:
- Enumerated Domain Value: <
- Enumerated Domain Value Definition: Value less than reported concentration
- Enumerated Domain Value Definition Source: Alberta Geological Survey
- Attribute:
- Attribute Label: SELENIUM_D
- Attribute Definition: Dissolved selenium in [mg/L] measured by ICP
- Attribute Definition Source: Alberta Geological Survey
- Attribute Domain Values:
- Range Domain:
- Range Domain Minimum: 0.004
- Range Domain Maximum: 0.004
- Attribute Units of Measure: mg/L
- Attribute:
- Attribute Label: SILICON_D
- Attribute Definition: Dissolved silicon in [mg/L] measured by ICP
- Attribute Definition Source: Alberta Geological Survey
- Attribute Domain Values:
- Range Domain:
- Range Domain Minimum: 1.68
- Range Domain Maximum: 4.38
- Attribute Units of Measure: mg/L
- Attribute:
- Attribute Label: Q_SILVER_D
- Attribute Definition:
- Qualifier '<' to indicate, if used, that the actual concentration of dissolved silver is less than the reported concentration as measured by ICP
- Attribute Definition Source: Alberta Geological Survey
- Attribute Domain Values:
- Enumerated Domain:
- Enumerated Domain Value: Null or Missing
- Enumerated Domain Value Definition: Value equal to reported concentration
- Enumerated Domain Value Definition Source: Alberta Geological Survey
- Enumerated Domain:
- Enumerated Domain Value: <
- Enumerated Domain Value Definition: Value less than reported concentration
- Enumerated Domain Value Definition Source: Alberta Geological Survey
- Attribute:
- Attribute Label: SILVER_D
- Attribute Definition: Dissolved silver in [mg/L] measured by ICP
- Attribute Definition Source: Alberta Geological Survey
- Attribute Domain Values:
- Range Domain:
- Range Domain Minimum: 0.001
- Range Domain Maximum: 0.001
- Attribute Units of Measure: mg/L
- Attribute:
- Attribute Label: STRONTIUM_D
- Attribute Definition: Dissolved strontium in [mg/L] measured by ICP
- Attribute Definition Source: Alberta Geological Survey
- Attribute Domain Values:
- Range Domain:
- Range Domain Minimum: 0.0272
- Range Domain Maximum: 0.257
- Attribute Units of Measure: mg/L
- Attribute:
- Attribute Label: SODIUM_D2
- Attribute Definition: Dissolved sodium in [mg/L] measured by ICP
- Attribute Definition Source: Alberta Geological Survey
- Attribute Domain Values:
- Range Domain:
- Range Domain Minimum: 2.2
- Range Domain Maximum: 22.4
- Attribute Units of Measure: mg/L
- Attribute:
- Attribute Label: SULPHUR_D
- Attribute Definition: Dissolved sulphur in [mg/L] measured by ICP
- Attribute Definition Source: Alberta Geological Survey
- Attribute Domain Values:
- Range Domain:
- Range Domain Minimum: 0.398
- Range Domain Maximum: 4.66
- Attribute Units of Measure: mg/L
- Attribute:
- Attribute Label: Q_TITANIUM_D
- Attribute Definition:
- Qualifier '<' to indicate, if used, that the actual concentration of dissolved titanium is less than the reported concentration as measured by ICP
- Attribute Definition Source: Alberta Geological Survey
- Attribute Domain Values:
- Enumerated Domain:
- Enumerated Domain Value: Null or Missing
- Enumerated Domain Value Definition: Value equal to reported concentration
- Enumerated Domain Value Definition Source: Alberta Geological Survey
- Enumerated Domain:
- Enumerated Domain Value: <
- Enumerated Domain Value Definition: Value less than reported concentration
- Enumerated Domain Value Definition Source: Alberta Geological Survey
- Attribute:
- Attribute Label: TITANIUM_D
- Attribute Definition: Dissolved titanium in [mg/L] measured by ICP
- Attribute Definition Source: Alberta Geological Survey
- Attribute Domain Values:
- Range Domain:
- Range Domain Minimum: 0.0004
- Range Domain Maximum: 0.0021
- Attribute Units of Measure: mg/L
- Attribute:
- Attribute Label: Q_THALLIUM_D
- Attribute Definition:
- Qualifier '<' to indicate, if used, that the actual concentration of dissolved thallium is less than the reported concentration as measured by ICP
- Attribute Definition Source: Alberta Geological Survey
- Attribute Domain Values:
- Enumerated Domain:
- Enumerated Domain Value: Null or Missing
- Enumerated Domain Value Definition: Value equal to reported concentration
- Enumerated Domain Value Definition Source: Alberta Geological Survey
- Enumerated Domain:
- Enumerated Domain Value: <
- Enumerated Domain Value Definition: Value less than reported concentration
- Enumerated Domain Value Definition Source: Alberta Geological Survey
- Attribute:
- Attribute Label: THALLIUM_D
- Attribute Definition: Dissolved thallium in [mg/L] measured by ICP
- Attribute Definition Source: Alberta Geological Survey
- Attribute Domain Values:
- Range Domain:
- Range Domain Minimum: 0.004
- Range Domain Maximum: 0.004
- Attribute Units of Measure: mg/L
- Attribute:
- Attribute Label: Q_VANADIUM_D
- Attribute Definition:
- Qualifier '<' to indicate, if used, that the actual concentration of dissolved vanadium is less than the reported concentration as measured by ICP
- Attribute Definition Source: Alberta Geological Survey
- Attribute Domain Values:
- Enumerated Domain:
- Enumerated Domain Value: Null or Missing
- Enumerated Domain Value Definition: Value equal to reported concentration
- Enumerated Domain Value Definition Source: Alberta Geological Survey
- Enumerated Domain:
- Enumerated Domain Value: <
- Enumerated Domain Value Definition: Value less than reported concentration
- Enumerated Domain Value Definition Source: Alberta Geological Survey
- Attribute:
- Attribute Label: VANADIUM_D
- Attribute Definition: Dissolved vanadium in [mg/L] measured by ICP
- Attribute Definition Source: Alberta Geological Survey
- Attribute Domain Values:
- Range Domain:
- Range Domain Minimum: 0.001
- Range Domain Maximum: 0.001
- Attribute Units of Measure: mg/L
- Attribute:
- Attribute Label: Q_TIN_D
- Attribute Definition:
- Qualifier '<' to indicate, if used, that the actual concentration of dissolved tin is less than the reported concentration as measured by ICP
- Attribute Definition Source: Alberta Geological Survey
- Attribute Domain Values:
- Enumerated Domain:
- Enumerated Domain Value: Null or Missing
- Enumerated Domain Value Definition: Value equal to reported concentration
- Enumerated Domain Value Definition Source: Alberta Geological Survey
- Enumerated Domain:
- Enumerated Domain Value: <
- Enumerated Domain Value Definition: Value less than reported concentration
- Enumerated Domain Value Definition Source: Alberta Geological Survey
- Attribute:
- Attribute Label: TIN_D
- Attribute Definition: Dissolved tin in [mg/L] measured by ICP
- Attribute Definition Source: Alberta Geological Survey
- Attribute Domain Values:
- Range Domain:
- Range Domain Minimum: 0.003
- Range Domain Maximum: 0.003
- Attribute Units of Measure: mg/L
- Attribute:
- Attribute Label: Q_ZINC_D
- Attribute Definition:
- Qualifier '<' to indicate, if used, that the actual concentration of dissolved zinc is less than the reported concentration as measured by ICP
- Attribute Definition Source: Alberta Geological Survey
- Attribute Domain Values:
- Enumerated Domain:
- Enumerated Domain Value: Null or Missing
- Enumerated Domain Value Definition: Value equal to reported concentration
- Enumerated Domain Value Definition Source: Alberta Geological Survey
- Enumerated Domain:
- Enumerated Domain Value: <
- Enumerated Domain Value Definition: Value less than reported concentration
- Enumerated Domain Value Definition Source: Alberta Geological Survey
- Attribute:
- Attribute Label: ZINC_D
- Attribute Definition: Dissolved zinc in [mg/L] measured by ICP
- Attribute Definition Source: Alberta Geological Survey
- Attribute Domain Values:
- Range Domain:
- Range Domain Minimum: 0.0006
- Range Domain Maximum: 0.0193
- Attribute Units of Measure: mg/L
- Attribute:
- Attribute Label: d18O
- Attribute Definition: d18O of water in [permil SMOW]
- Attribute Definition Source: Alberta Geological Survey
- Attribute Domain Values:
- Range Domain:
- Range Domain Minimum: -16.52
- Range Domain Maximum: -9.94
- Attribute Units of Measure: permil SMOW
- Attribute:
- Attribute Label: d2H
- Attribute Definition: d2H of water in [permil SMOW]
- Attribute Definition Source: Alberta Geological Survey
- Attribute Domain Values:
- Range Domain:
- Range Domain Minimum: -131.4
- Range Domain Maximum: -98.89
- Attribute Units of Measure: permil SMOW
- Detailed Description:
- Entity Type:
- Entity Type Label: Detection_limit_summary
- Entity Type Definition:
- This table summarizes the analytical detection limits for the various measured chemical concentrations or calculated ratios
- Entity Type Definition Source: Alberta Geological Survey
- Attribute:
- Attribute Label: Parameter
- Attribute Definition: Name of the parameter the detection limit value pertains to
- Attribute Definition Source: Alberta Geological Survey
- Attribute Domain Values:
- Unrepresentable Domain: Values do not exist in a known, predefined set
- Attribute:
- Attribute Label: Detection_Limit
- Attribute Definition:
- Detection limit for the analytical parameter listed in the units used to measure the parameter concentration
- Attribute Definition Source: Alberta Geological Survey
- Attribute Domain Values:
- Range Domain:
- Range Domain Minimum: 0.0001
- Range Domain Maximum: 5
- Attribute Units of Measure:
- Detailed Description:
- Entity Type:
- Entity Type Label: Field_Definitions
- Entity Type Definition: This table contains a description of the various fields contained in the tables of the database.
- Entity Type Definition Source: Alberta Geological Survey
- Attribute:
- Attribute Label: Table
- Attribute Definition: Table the field name is found
- Attribute Definition Source: Alberta Geological Survey
- Attribute Domain Values:
- Unrepresentable Domain: Values do not exist in a known, predefined set
- Attribute:
- Attribute Label: Field
- Attribute Definition: Field name
- Attribute Definition Source: Alberta Geological Survey
- Attribute Domain Values:
- Unrepresentable Domain: Values do not exist in a known, predefined set
- Attribute:
- Attribute Label: Description
- Attribute Definition: Description of the field
- Attribute Definition Source: Alberta Geological Survey
- Attribute Domain Values:
- Unrepresentable Domain: Values do not exist in a known, predefined set
- Detailed Description:
- Entity Type:
- Entity Type Label: Location_information
- Entity Type Definition: This table contains information on the location of the sample sites.
- Entity Type Definition Source: Alberta Geological Survey
- Attribute:
- Attribute Label: ID
- Attribute Definition: Unique ID assigned by the AGS to the sample
- Attribute Definition Source: Alberta Geological Survey
- Attribute Domain Values:
- Unrepresentable Domain: Values do not exist in a known, predefined set
- Attribute:
- Attribute Label: Sample_Name
- Attribute Definition: Sample name given to the sample during sampling
- Attribute Definition Source: Alberta Geological Survey
- Attribute Domain Values:
- Unrepresentable Domain: Values do not exist in a known, predefined set
- Attribute:
- Attribute Label: Sample_ID
- Attribute Definition: Sample ID assigned to the sample during sampling
- Attribute Definition Source: Alberta Geological Survey
- Attribute Domain Values:
- Unrepresentable Domain: Values do not exist in a known, predefined set
- Attribute:
- Attribute Label: Sample_Type
- Attribute Definition: Type of location the sample was collected from
- Attribute Definition Source: Alberta Geological Survey
- Attribute Domain Values:
- Enumerated Domain:
- Enumerated Domain Value: Creek Sample
- Enumerated Domain Value Definition: Creek Sample
- Enumerated Domain Value Definition Source: Alberta Geological Survey
- Enumerated Domain:
- Enumerated Domain Value: Lake Sample
- Enumerated Domain Value Definition: Lake Sample
- Enumerated Domain Value Definition Source: Alberta Geological Survey
- Enumerated Domain:
- Enumerated Domain Value: River Sample
- Enumerated Domain Value Definition: River Sample
- Enumerated Domain Value Definition Source: Alberta Geological Survey
- Enumerated Domain:
- Enumerated Domain Value: Stream Sample
- Enumerated Domain Value Definition: Stream Sample
- Enumerated Domain Value Definition Source: Alberta Geological Survey
- Attribute:
- Attribute Label: Latitude
- Attribute Definition: Latitude in [decimal degrees], datum NAD83
- Attribute Definition Source: Alberta Geological Survey
- Attribute Domain Values:
- Range Domain:
- Range Domain Minimum: 49
- Range Domain Maximum: 60
- Attribute Units of Measure: decimal degrees
- Attribute:
- Attribute Label: Longitude
- Attribute Definition: Longitude in [decimal degrees], datum NAD83
- Attribute Definition Source: Alberta Geological Survey
- Attribute Domain Values:
- Range Domain:
- Range Domain Minimum: -120
- Range Domain Maximum: -110
- Attribute Units of Measure: decimal degrees
- Attribute:
- Attribute Label: Sample_Date
- Attribute Definition: Date the sample was collected in d/mm/yyyy format
- Attribute Definition Source: Alberta Geological Survey
- Attribute Domain Values:
- Unrepresentable Domain: Values do not exist in a known, predefined set
- Detailed Description:
- Entity Type:
- Entity Type Label: Units_summary
- Entity Type Definition:
- This table provides information on the units of measure for the various chemical parameters or calculated ratios.
- Entity Type Definition Source: Alberta Geological Survey
- Attribute:
- Attribute Label: Parameter
- Attribute Definition: Name of the parameter the units value pertains to
- Attribute Definition Source: Alberta Geological Survey
- Attribute Domain Values:
- Unrepresentable Domain: Values do not exist in a known, predefined set
- Attribute:
- Attribute Label: Units
- Attribute Definition: Unit of measure for the parameter listed
- Attribute Definition Source: Alberta Geological Survey
- Attribute Domain Values:
- Unrepresentable Domain: Values do not exist in a known, predefined set
- Attribute:
- Attribute Label: Error
- Attribute Definition: Associated error with the reported parameter value
- Attribute Definition Source: Alberta Geological Survey
- Attribute Domain Values:
- Unrepresentable Domain: Values do not exist in a known, predefined set
- Distribution Information:
- Distributor:
- Contact Information:
- Contact Organization Primary:
- Contact Organization: Alberta Geological Survey
- Contact Person: Publications and Marketing Advisor
- Contact Position: Publications and Marketing Advisor
- Contact Address:
- Address Type: mailing and physical
- Address: Alberta Energy Regulator
- Address: 4th Floor, Twin Atria Building
- Address: 4999-98 Avenue NW
- City: Edmonton
- State or Province: Alberta
- Postal Code: T6B 2X3
- Country: Canada
- Contact Voice Telephone: (780) 422-1927
- Contact Facsimile Telephone: (780) 422-1918
- Contact Electronic Mail Address: AGS-Info@aer.ca
- Hours of Service: 8:00 a.m. to 12:00 p.m. and 1:00 p.m. to 4:30 p.m.
- Resource Description: DIG 2007-0076
- Distribution Liability:
- The Alberta Energy Regulator/Alberta Geological Survey (AER/AGS) licenses this information under the Open Government License - Alberta. Any references to proprietary software in our documentation, and/or any use of proprietary data formats in our releases, do not constitute endorsement by the AER/AGS of any manufacturer's product.
- Standard Order Process:
- Digital Form:
- Digital Transfer Information:
- Format Name: MDB
- Format Version Number: Microsoft Access 2000 file format
- File Decompression Technique: WinZip 8.0 (3105)
- Transfer Size: 66 KB
- Digital Transfer Option:
- Online Option:
- Computer Contact Information:
- Network Address:
- Network Resource Name: http://www.ags.gov.ab.ca/publications
- Fees: Free
- Metadata Reference Information:
- Metadata Date: 20131107
- Metadata Contact:
- Contact Information:
- Contact Organization Primary:
- Contact Organization: Alberta Geological Survey
- Contact Person: Publications and Marketing Advisor
- Contact Position: Publications and Marketing Advisor
- Contact Address:
- Address Type: mailing and physical
- Address: Alberta Energy Regulator
- Address: 4th Floor, Twin Atria Building
- Address: 4999-98 Avenue NW
- City: Edmonton
- State or Province: Alberta
- Postal Code: T6B 2X3
- Country: Canada
- Contact Voice Telephone: (780) 422-1927
- Contact Facsimile Telephone: (780) 422-1918
- Contact Electronic Mail Address: AGS-Info@aer.ca
- Hours of Service: 8:00 a.m. to 12:00 p.m. and 1:00 p.m. to 4:30 p.m.
- Metadata Standard Name: FGDC Content Standard for Digital Geospatial Metadata
- Metadata Standard Version: FGDC-STD-001-1998
- Metadata Time Convention: local time
- Metadata Access Constraints: none
- Metadata Use Constraints: none